How to Cut Vinyl Plank Flooring With a Utility knife

If you’re remodeling your house or someone else’s, you may need to cut vinyl plank flooring. In this guide, we will teach you how to cut vinyl plank flooring with a utility knife.

First, you need to understand that there are two types of vinyl plank flooring. One is glued and the other is not. If your vinyl plank flooring is not glued, then you can simply use a utility knife to score the top of the plank and snap it in half. If your vinyl plank flooring is glued, then you will need to use a saw to cut through the adhesive and then snap the plank in half.

If you’re using a utility knife, make sure that you have a sharp blade. You also need to be very careful when cutting through the vinyl so that you don’t damage the subfloor beneath it.

Let’s get to it.

Tools Needed

Before providing a step-by-step guide, you’ll need tools. These tools will make it easier for you to achieve a precise and clean cut.

Utility Knife – This is the most important tool as it will be used to score and snap the vinyl plank.

Tape Measure – You’ll need this to measure the vinyl plank so that you can make an accurate cut.

Pencil – A pencil will be used to mark where you need to make your cuts.

Saw – If your vinyl plank flooring is glued, then you’ll need a saw to cut through the adhesive.

Now that you have all of the necessary tools, we can get started with the step by step guide.

Step by Step – How To Use A Utility Knife To Cut Vinyl Plank Flooring

Step One – Measure The Vinyl Plank

The first step is to measure the vinyl plank. You’ll need to know how long or short you need to cut the vinyl plank so that it fits perfectly in the space where it will be installed.

Use a tape measure to get the exact dimensions of the vinyl plank. Once you have the dimensions, use a pencil to mark where you’ll need to make your cuts.

Step Two – Score The Vinyl Plank

After you’ve marked where you need to make your cuts, it’s time to score the vinyl plank with a utility knife.

Make sure that your utility knife is sharp so that you can easily score through the vinyl plank. Start by holding the utility knife at a 45-degree angle and then drag it along the length of the vinyl plank.

You only need to score the top layer of the vinyl plank. You don’t need to cut all the way through as you’ll be snapping the plank in half later on.

Step Three – Snap The Vinyl Plank In Half

Now that you’ve scored the vinyl plank, it’s time to snap it in half. Apply some pressure to the scored line and then bend the vinyl plank until it snaps in half.

If your vinyl plank is glued, then you’ll need to use a saw to cut through the adhesive before snapping the plank in half.

Step Four – Cut The Vinyl Plank To Size

After you’ve snapped the vinyl plank in half, you’ll need to cut it down to size so that it fits perfectly in the space where it will be installed.

Use a saw to cut the vinyl plank to size. Make sure that you cut it so that it’s a tight fit and that there’s no excess vinyl hanging off the sides.

Safety Tips

When cutting vinyl plank flooring, always use caution. Make sure that you have a sharp blade in your utility knife and be careful not to damage the subfloor beneath it. Also, make sure that you are using the correct tool for the job. A saw is needed to cut through the adhesive on glued vinyl plank flooring, while a utility knife is ideal for scoring and snapping non-glued vinyl planks.

Can You Use A Tile Cutter To Cut Vinyl Plank Flooring?

A tile cutter can be used to cut vinyl plank flooring, but it’s not the ideal tool for the job. A tile cutter is designed to cut through ceramic tiles, so it’s not as sharp as a utility knife and it won’t score the vinyl as easily. If you do choose to use a tile cutter, make sure that you have a sharp blade and be very careful when making your cuts.

Can You Cut Vinyl Flooring Lengthwise?

You can definitely cut vinyl flooring lengthwise, but it’s not always necessary. If you have a large space that needs to be covered, then it might be necessary to cut the vinyl plank flooring in half so that it’s a more manageable size. However, if your space is relatively small, then you can probably install the vinyl plank flooring without having to cut it. Always measure the dimensions of the vinyl plank before making any cuts.

Does Laminate Flooring Dull Knife Blades?

Laminate flooring can dull knife blades, but it all depends on the type of laminate flooring that you have. If you have an engineered wood laminate, then the knife blades might dull more quickly than if you have a vinyl laminate. Always test out a small section of the laminate flooring with your utility knife to see how it performs before cutting the entire plank. If your knife blades are dulling too quickly, then try using a different type of blade or switch to a saw to make your cuts.

Final Thoughts

Cutting vinyl plank flooring can be a daunting task, but with the right tools and safety precautions, it’s definitely doable. Make sure that you have a sharp blade in your utility knife and be careful not to damage the subfloor beneath it. Also, make sure that you are using the correct tool for the job. A saw is needed to cut through the adhesive on glued vinyl plank flooring, while a utility knife is ideal for scoring and snapping non-glued vinyl planks.

Leave a Comment